Heavy-duty galvanized steel base assembly

Corrosion resistance inside and out

Rubber wheels designed in-line with housing

Stacking tabs included

Online charges for shipping are the approximate charges not the final shipping charge

For Large Appliances above 80 pounds the shipping rates may vary depending upon state.

EWI SCVKM36-EX 220-240 Volt/ 50 Hz 36” Heavy Duty Drum Fan

840 RPM Speed

9,200 cfm air flow

Twisted blades with unique low solidity ratio

Narrow fan profile with ergonomic pull handle and integrated base assembly handles

Low sound levels exceeding OSHA regulations

Stacking capability up to four fans high

Made in USA with dependable, long lasting components

High density polyethylene housing for superior impact, extreme temperature and abrasion resistance

Product Specification:

Unit Dimension: 39.75”H x 40.75”W x 19.75”D (1010x1035x502 mm)

Unit Weight: 90 lb. (41 kg)

Shipping Weight: 92 lb. (42 kg)

Heavy Duty Drum Fan

Technical Specification

Voltage 220-240 Volt

Hertz 50 Hz

Thrust 4.4 lbf (19.6 N)

Thrust Eff. Ratio 12.1 lbf/kW (53.8 N/kW)

Airflow 9,200 cfm(15,600 m3/h)

Efficiency 25.1 cfm/W (42.6 m3/h/W)

Air Velocity @ 10 ft. 600 fpm (3.0 m/s)

7.0 mph (11.0 km/h)

Sound Level @ 10 ft. 62.5 dBA

Motor Specification

Enclosure TEAO

Horsepower 1/2 hp (0.375 kW)

Speeds Single

Rotational Speed 840 rpm

Current 3.1 A

Phase 1 ph

Service Factor 1.0

Ambient Temperature 40°C

Insulation Class B

Thermally Protected Yes

Shaft Size 5/8 in. (15.9 mm)

Blade Specifications

Diameter 36 in. (92 cm)

Wings 3

Wing Material Galvanized

Pitch 22°

Bore Size 5/8 in. (1.59 cm)

Weight and Dimension

Unit Weight 90 lb. (41 kg)

Shipping Weight 92 lb. (42 kg)

Unit Dimension 39.75”H x 40.75”W x 19.75”D (1010x1035x502 mm)

For Residential delivery there will additional $40 to $75 charge Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop off Freight service MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON ARE A DEAD GIVEAWAY. If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to affect the proper functionality of the product, please refuse the delivery.