* Drying, Anti-crease/End Indicative Program Phase
* Additional timed drying programs
* XXL Door for easy loading and Uploading
* 2800 W Connection Rating
* “A” Condensation Efficiency
* 4 Different Position for Door Handle
* 4 Adjustable feet
* Optional stacking kit available (STA9)
* 8 Kg Max Load Capacity
* “B” Energy efficiency Class
* Condenser Drying Technology: the moisture is
condensed into a water container, No outside
ventilation required
* Sensor Dryer
* Digital LED Display
* Reversing drum
* Delay Start
* XXL Drum
Product Specification:
Unit Dimension: 33.4”H x 23.6”W x 23.6”D
(850x600x600mm)
Product Type: Condenser Dryer
Technical Specification
Voltage 220-240 Volt
Hertz 50 Hz
Maximum dry bulk density 8.0 Kg
Performance Condensation
Reversible drum Yes
Door Handle position 4
Delay Start Yes
Drying Anti-Crease Yes
Condenser container location Top left panel
Adjustable feet Yes
Annual energy consumption 560 kWh
Connection Rating 2800 W
Energy cupboard dry cotton 1000rpm 4.79 kWh
Energy cupboard dry cotton, half load 1000 rpm 2:48
kWh
Power consumption in 'off' position 0.5 W
Power consumption in stand-by 0.5 W
Duration 'standby' after program 10 Min
Weighted program time, full and half load 99 Min
Duration cotton cupboard dry 1000rpm 134 Min
Program length cotton cupboard dry, half load 1000 rpm
72 Min
Average condensation efficiency 90.5 %
Weighted condensation efficiency, full and half load 91
%
Noise drying 64 dB
Condensation Efficiency A
Energy efficiency Class B
Dimension
Unit Dimension 33.4”H x 23.6”W x 23.6”D
(850x600x600mm)
Online charges for shipping are the approximate charges
not the final shipping charge
For Large Appliances above 80 pounds the shipping
rates may vary depending upon state.
For Residential delivery there will additional $40 to $75
charge
Due to the size and weight of this product, this product
does not qualify for In-home Delivery. It will be shipped
via Curbside Drop Off Freight service
MAKE SURE TO OPEN THE PACKAGING AND
FULLY INSPECT INSIDE OF THE SHIPMENT FOR
ANY CONCEALED DAMAGES, BEFORE SIGNING
FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER
CARTON IS A DEAD GIVEAWAY.
If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to affect the proper functionality of the product, please refuse the delivery.
