American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use

INPUT:

Voltage: 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase

Model A220-20: Two 36 inch power cords, 20 amperes each line, NEMA 5-20 plugs

OUTPUT VOLTAGE:

20 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.

Portable, easy to use

Silent

Outlets for US 220 volt straight blade plugs

Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.

Single Phase Input: 216 to 250 Volts AC (2 times input voltage)

Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)

OUTPUT POWER: 4400 watts continuous; 22,000 watts peak, typical at 220 volts

OUTPUT CURRENT: 20 amps continuous

OUTPUT RECEPTACLE: straight blade, duplex, NEMA 6-20R

POWER CONSUMPTION: 8 watts, plus equipment connected

SIZE: Approximately 6-1/2 inches x 5 inches x 3 inches

WEIGHT: 2.7 pounds

ENVIRONMENT: 35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust