Variable 2-speed 1/2" Hammer Driver-Drill (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. Variable speed Impact Driver (0-2,300 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of Max Torque and weighs only 3.3 lbs. Reciprocating Saw provides 0-2,900 SPM with "tool-less" blade changes & shoe adjustments and weighs only 7.9 lbs.

Variable 2-speed 1/2" Hammer Driver-Drill (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. Variable speed Impact Driver (0-2,300 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of max torque and weighs only 3.3 lbs. Reciprocating Saw provides 0-2,900 SPM with "tool-less" blade changes & shoe adjustments and weighs only 7.9 lbs. 4-position flashlight with Xenon bulb runs up to 4 hours per charge. LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 3x more cycles. Makita Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). 3-year warranty on tools and 1-year warranty on flashlight, batteries and charger. Specifications

LXPH01Z 18V LXT Li-Ion 1/2" Hammer Driver-Drill Capacity in Steel: 1/2" Capacity in Wood: 1-1/2" Capacity in Masonry: 1/2" No Load Speed: Low 0-400 RPM, High 0-1,500 RPM Blows Per Minute: Low 0-6,000 BPM, High 0-22,500 BPM Max Torque (in. lbs.): 480 LXDT04Z 18V LXT Li-Ion Impact Driver Hex Shank: 1/4" No Load Speed: 0 - 2,300 RPM Impacts per Minute: 0 - 3,200 IPM Max Torque (in.lbs.): 1,420 BJR182Z 18V LXT Li-Ion Recipro Saw Length of Stroke: 1-1/8" Max Cutting Depth in Pipe: 5-1/8" Max Cutting Depth in Wood w/12" blade: 10" Strokes per Minute: 0 - 2,900 SPM BML185 18V LXT Lithium-Ion Flashlight Run Time: up to 4 hours Overall Length: 11-1/8"

This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets